How to Quickly Repair The Wear of Belt Conveyor Bearing

Today, let's learn how to quickly modify the bearing position of the belt conveyor on site for the wear problem.

1. Remove the parts on the shaft, expose the parts to be repaired, remove the oil stain, and measure the data of the wear position;

2. Use oxygen acetylene flame to remove oil from the parts to be repaired until the oil traces are carbonized without sparks and splashes;

3. Use the electric wire brush to remove the dust and rust of shaft repair and reset, use a grinding wheel to remove the metal bulge and burr, and then use a grinder to polish the repaired surface to achieve roughness, no loose animals, and see the primary color of metal;

4. Calculate and blend the soray carbon nano polymer material according to the wear amount, and apply the material to the repair part;

5. Material curing;

6. Reassemble.

Case pictures of quick repair of belt conveyor bearing wear on site