6700 2RS Single Row Radial Ball Bearing 10*15*4mm SUNBEARING
6700 2RS Single Row Radial Ball Bearing 10*15*4mm SUNBEARING
6700 2RS Single Row Radial Ball Bearing 10*15*4mm SUNBEARING
6700 2RS Single Row Radial Ball Bearing 10*15*4mm SUNBEARING
Model
6700

Item specifics

Color
Silver
Bore Diameter
10 mm
Outside Diameter
15 mm
Overall Width
4 mm

Review

Description

6700 2RS Single Row Radial Ball Bearing 10*15*4mm SUNBEARING

6700 bearing
Bore diameter:
10 mm
Basic dynamic load rating
855 N
Outside diameter:
15 mm
Basic static load rating
435 N
Overall width:
4 mm
Max Speed (Grease)
15,000 rpm
Rows of Balls
Single
Ball Qty
11
Outer ring type:
Unsplit
 Ball Dia (Dw)
1.588 mm
Radial clearance class
C0 Standard Clearance
 Mass
1.4 g
Closure type:
2RS
Max. Shaft Shoulder Dia. Inner (Ui)
11 mm
Material
Chrome Steel
Min. Housing Shoulder Dia., Outer (Uo)
14 mm
Cage Material
 Sheet Steel
Precision
A1
Radius (min) (rs)
 0.15 mm
Max Speed (Oil)
17,000 rpm
6700 bearing drawing
6700 ball bearing

6700 Bearing Short Description

C3, C4

Means "increased internal game". Often referred to as high speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. WARNING and increased internal clearance bearing will not operate optimally at low speeds. We invite you to refer to the technical data sheet of the desired bearing to know its speed limit.


The basic deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls, and a set of cages. There are two types of deep groove ball bearings, single row, and double row. The deep groove ball structure is divided into two types: sealed and open. The open type means that the bearing does not have a sealed structure. The sealed deep groove ball is divided into dust-proof and oil-proof. seal.

HOW DO I KNOW IF MY BEARING IS STAINLESS STEEL?

A stainless steel bearing is usually magnetizable because it is a stainless steel AISI 420, harder and more shock resistant than the current stainless steel (AISI 304).

To check if your bearing is stainless steel, just read the reference engraved on the side of the bearing. This reference must begin with the prefix "S" meaning "Stainless Steel".