SUNBEARING 7006C Angular Contact Ball Bearing Silver 30*55*13mm Chrome Steel GCR15
SUNBEARING 7006C Angular Contact Ball Bearing Silver 30*55*13mm Chrome Steel GCR15
SUNBEARING 7006C Angular Contact Ball Bearing Silver 30*55*13mm Chrome Steel GCR15
SUNBEARING 7006C Angular Contact Ball Bearing Silver 30*55*13mm Chrome Steel GCR15
Price
US $19.29
Model
7006C
MOQ
1 piece

Item specifics

Inner diameter
30mm
Outer diameter
55mm
Width
13mm
Material
Chrome Steel GCR15

Review

Description

Product Description

7006C angular contact ball bearing

Angular Contact Ball Bearing 7006C

Specification

Design Units  

Metric

Structure

Ball Bearing

Weights  

0.11kgs

Cage Material 

Steel cage

Material

Chrome Steel GCR15

Ball Type  

Carbon chromium steel

Seals Type

Seals

Certificate

ISO9001:2008

Advantage

Manufacture According To Drawings And OEM Service.

Number of Row

Single

Dimensions

d-Bore Diameter  

30mm

D-Outer Diameter  

55mm

Precision Rating

P5 P6 P4 P2 P0

Clearance

 

                                                                                      C2 C3 C4 C5 C0

H-Total Width 

13mm

Basic Load Ratings

Cr Dynamic Load Rating   

15100N

C0r Static Load Rating 

10300N

 

Angular Contact Ball Bearing Brief Introduction:

Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis, which means that they are designed to accommodate combined loads, i.e. simultaneously supporting radial and axial loads. The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. The contact angle α is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis. Retainers are made of brass ,synthetic resin of others subject to individual bearing features and application conditions.


Angular Contact Ball Bearing Working Principle:

It uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the Tycontact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load.


Angular Contact Ball BearingTypes:

Angular contact ball bearings are produced in a wide variety of designs and sizes. Those commonly used and included in this catalogue are:

1.Single-row angular contact ball bearings


Axial load in single direction can be sustained. While supporting pure radial load, the bearings must be installed and used in pairs since the line of action of the rolling element load is not in the same plane as that of the radial one, resulting in inner separate force.

2.Double-row angular contact ball bearings


This is basically a back-to-back mounting of two single-row angular contact ball bearings, but their inner and outer rings are each integrated into one. Axial loads in both directions can be sustained, and the capacity to sustain moments is good. This type is used as fixed-end bearings. Their cages are pressed steel.

3.Four-point angular contact ball bearings

 

The inner ring is split radially into two pieces. Their design allows one bearing to sustain significant axial loads in either direction. The contact angle is 35°, so the axial load capacity is high. This type is suitable for carrying pure axial loads or combined loads where the axial loads are high. The cages are made of machined brass.


Angular Contact Ball Bearing Typical Applications:

7006C ball bearings are mainly used for steel industry, mining& construction, papermaking machinery, wind turbines, semiconductors, machine tools, gearboxes, electric motors, pumps& compressors, injection molding machines.