SUNBEARING 829950 Tapered Thrust Roller Bearing Brass 250*380*100mm Stainless Steel GCR15
- Model
- 829950
Review
Description
Product Description
Thrust roller bearing 829950 | |
|---|---|
Specification | |
Design Units | Metric |
Structure | Roller Bearing |
Weights | 42.3kgs |
Cage Material | Brass |
Material | GCR 15, Stainless steel etc. |
Roller Type | Tapered |
Number of Row | Single |
Dimensions | |
d-Bore Diameter | 250mm |
D-Outer Diameter | 380mm |
d1 | 265mm |
D1 | |
H-Total Width | 100mm |
r-Fillet Radius | 0.6mm |
R | 2.0mm |
da | 264mm |
Da | 285mm |
Basic Load Ratings | |
Cr Dynamic Load Rating | 850kN |
C0r Static Load Rating | 5,00kN |
- 829950 tapered thrust roller bearing is equal to SKF350980C&FAG528974
- This bearing with planar shaft washers
- Be able to bear slightly eccentric shaft relative to bearing box hole
- There is a spacer sleeve between the two housing washer
- It can withstand high axial load and can position the axial radial position to some extent
- 829950 Thrust roller bearing is mainly used in steel rolling mills of steel manufacturing, are usually together used with multi-row cylindrical roller bearings. The size of the spacing sleeve makes the roller bearing box cover screw tight, and the bearing does not need a special spring to adjust.
- The bidirectional thrust tapered roller bearings are usually used on the roll neck and roll bearing box to fit installation. Most of the shaft bearing seats with one or two positioning slots that you might use embedded locating slot key or similar method to prevent rotation of the housing washes.
