SUNBEARING Thrust Roller Bearing 829736 Gold and Silver 180*280*90mm Stainless Steel GCR15
- Model
- 829736
Review
Description
|
Thrust Roller Bearing 829736
|
|
|---|---|
|
Specification
|
|
|
Design Units
|
Metric
|
|
Structure
|
Roller Bearing
|
|
Weights
|
20.27kgs
|
|
Cage Material
|
Steel Cage.Brass Cage.Nylon Cage
|
|
Material
|
Stainless Steel GCR15
|
|
Ball Type
|
Steel Roller
|
|
Seals Type
|
Open
|
|
Certificate
|
ISO9001:2008
|
|
Feature
|
This bearing with planar shaft washers
|
|
Number of Rows
|
Double |
|
Dimensions
|
|
|
d-Bore Diameter
|
180mm
|
|
D-Outer Diameter
|
280mm
|
|
Precision Rating
|
P0 P5 P4 P6 P2
|
|
Clearance
|
C2 C3 C4 C5 C0
|
|
H-Total Width
|
90mm
|
Application
Double Direction Taper Thrust Roller Bearings can be used in many areas.
Double Direction Thrust Roller Bearing is mainly used in steel rolling mills of steel manufacturing, are usually together used with multi-row cylindrical roller bearings. The size of the spacing sleeve makes the roller bearing box cover screw tight, and the bearing does not need a special spring to adjust.
The bidirectional thrust tapered roller bearings are usually on the roll neck and roll bearing box to fit installation. Most of the shaft bearing seats with one or two positioning slots that you might use embedded locating slot key or similar method to prevent rotation of the housing washes.
SUNBEARING can provide professional consults to customers for your application fields and offer you specific application solutions with high efficiency and precise cost control.
Feature
The mode of this bearing is equal to SKF350980C&FAG528974
This bearing with planar shaft washers
Be able to bear slightly eccentric shaft relative to bearing box hole
There is a spacer sleeve between the two housing washer
It can withstand high axial load and can position the axial radial position to some extent
