7322BG Radial Angular Contact Ball Bearing 110*240*50mm SUNBEARING
- Model
- 7322BG
Item specifics
- Color
- Silver
- Inner Diameter
- 110mm
- Outer Diameter
- 240mm
- Width
- 50mm
Review
Description
7322BG Radial Angular Contact Ball Bearing 110*240*50mm SUNBEARING
Bore diameter:
|
110 mm
|
Nlim (oil)
|
3,700 Tr/min |
Outside diameter:
|
240 mm
|
Nlim (grease)
|
2,700 Tr/min |
Overall width:
|
50 mm
|
Min operating temperature, Tmin
|
-40 °C |
Precision
|
A1
|
Max operating temperature, Tmax
|
120 °C |
Outer ring type:
|
Unsplit
|
Characteristic cage frequency, FTF
|
0.41 Hz |
Internal clearance:
|
C3
|
Characteristic rolling element frequency, BSF
|
4.14 Hz |
Closure type:
|
Open
|
Weight:
|
9.8 kgs |
Dynamic load, C | 226 kN | da min | 124 mm |
Static load, C0 | 226 kN | Da max | 226 mm |
Fatigue limit load, Cu | 7.7 kN | ra max | 2.5 mm |
7322BG Bearing Short Description
Single-row angular contact ball bearings can only withstand axial loads in one direction, and when subjected to radial loads, they will cause additional axial forces. And can only limit the axial displacement of the shaft or housing in one direction. Angular contact ball bearings have a contact angle of 40 degrees, so they can withstand large axial loads.
Angular contact ball bearings are a non-separable design, and the shoulders on both sides of the inner and outer rings vary in height. In order to improve the load capacity of the bearing, the shoulder on one side will be processed lower, so that the bearing can be loaded with more steel balls.
7322 Angular Contact Ball Bearing Features
Bearing capacity is greater than ordinary ball bearings
Can withstand large axial loads or pure axial loads
The bigger the contact angle, the higher the axial load capacity. Small contact angle should be used at high speed
Application
Single-row angular contact ball bearings: machine tool spindle, high-frequency motor, gas turbine, centrifugal separator, small car front wheel, differential pinion shaft, booster pump, drilling platform, food machinery, indexing head, repair welding machine, Low noise cooling tower, electromechanical equipment, coating equipment, machine tool slot plate, arc welding machine.