S6000-2RS Stainless Steel Deep Groove Ball Bearing 10*26*8mm SUNBEARING
- Model
- S6000
Item specifics
- Color
- Silver
- Inner Diameter
- 10mm
- Outer Diameter
- 26mm
- Width
- 8mm
- MOQ
- 1
- Service
- OEM
- Samples
- Free Sample
Review
Description
S6000-2RS Stainless Steel Deep Groove Ball Bearing 10*26*8mm SUNBEARING
Bore diameter:
|
10 mm
|
Limiting speed
|
18400 1/min |
Outside diameter:
|
26 mm
|
Basic dynamic load rating, radial
|
3890 N |
Overall width:
|
8 mm
|
Basic static load rating, radial
|
1570 N |
Rows of Balls
|
Single
|
Mass
|
0.02 kg (approx.) |
Outer ring type:
|
Unsplit
|
Bore Tolerance
|
+0/-0.008mm |
Internal clearance:
|
CN(Standard)
|
Seal Material
|
Nitrile Rubber |
Closure type:
|
2RS
|
Bearing Material
|
440C Stainless Steel |
Ring Material: | Stainless Steel | Da max | 24 mm |
Operating Temperature Range | -14 Degrees to 212 Degrees F | da min | 12 mm |
Bearing Number | S6000 | ra max | 0,3 mm |
S6000 Bearing Short Description
S6000 bearing uses stainless steel material that can resist corrosion caused by moisture and other media. Provide closed (with seal or dust cover) or open design. Open bearings can also be equipped with seals or dust caps, and there are generally grooves on the side of the inner ring.
The load-carrying capacity of these bearings is lower than that of high chromium steel bearings of the same size
S6000 Deep Groove Ball Bearing Features
Compared with ordinary bearings, stainless steel ball bearings not only have obvious advantages in material but also in terms of technology and precision control, they are much stricter than ordinary bearings. During the working process, the stainless steel bearing works stably, with low noise, corrosion resistance, and wide application.
Compared with ordinary bearing steel, stainless steel bearings have stronger anti-rust and anti-corrosion properties. Choose suitable lubricants, dust caps, etc., and can be used in an environment of -60℃~+300℃. Stainless steel deep groove ball bearings can resist corrosion caused by moisture and several other media. This type of single-row deep groove ball bearing is the same as the standard deep groove ball bearing made of carbon chromium (rolling bearing) steel. It has a deep bearing raceway groove and a high degree of fit between the bearing raceway and the ball.