UCFC-209 45mm Flange Bearing 45*160*49.2mm Cast Iron SUNBEARING
UCFC-209 45mm Flange Bearing 45*160*49.2mm Cast Iron SUNBEARING
UCFC-209 45mm Flange Bearing 45*160*49.2mm Cast Iron SUNBEARING
UCFC-209 45mm Flange Bearing 45*160*49.2mm Cast Iron SUNBEARING
UCFC-209 45mm Flange Bearing 45*160*49.2mm Cast Iron SUNBEARING
UCFC-209 45mm Flange Bearing 45*160*49.2mm Cast Iron SUNBEARING
Model
UCFC209

Item specifics

Color
Green
Material
Cast Iron
MOQ
1
Service
OEM
Samples
Free Sample

Review

Description

UCFC-209 45mm Flange Bearing 45*160*49.2mm Cast Iron SUNBEARING

Product Description


Product Name

Pillow Block Bearing UCFC209

Structure

Pillow block Bearing

Seals

Rubber Seal

Bore Size

45mm

Bore Type

Round

Outside Diameter

60mm

Duty Type

Medium Duty, Heavy Duty, and Others 

Width

49.2mm

Operating Temperature Range:

-20 to +120°C

Material

Plastic; Chrome Steel, Carbon Steel,  Stainless Steel

Lubrication Type:

Oil; Grease;

Cage

GCR 15, Stainless steel, etc.

Series:

UCFC

Certificate

ISO9001:2008

Features

The inner ring is fastened onto the shaft in two places by set screws.

Colour

Green

Bearing Structure

Spherical Surface Ball Bearing

The Number Of  Row

Single

Weight

2.7kgs

Clearance

C2 C0 C3 C4 C5

Tolerance

ABEC1  ABEC3  ABEC5  ABEC7

 bearing unit drawing

UCFC Pillow block bearing is the combination of a radial ball bearing, seal, and a housing of high-grade cast iron or pressed steel, which comes in various shapes.

The outer surface of the bearing and the internal surface of the housing is spherical so that the unit is self-aligning. The inside construction of the ball bearing for the unit is such that steel balls and retainers of the same type as in series 62 and 63 of the deep groove ball bearing are used. A duplex seal consisting of a combination of an oil-proof synthetic rubber seal and a slinger is provided on both sides.

Depending on the pillow block bearing type, the following methods of fitting to the shaft are employed:

(1) The inner ring is fastened onto the shaft in two places by set screws.

(2) The inner ring has a tapered bore and is fitted to the shaft by means of an adapter.

(3) In the eccentric locking collar system the inner ring is fastened to the shaft by means of eccentric grooves provided at the side of the inner ring and on the collar.